Output Connectors

When purchasing power supplies, you must specify the output connectors specification. This article will for help determining what kinds of connectors you need.

Item Code	Item Type	Description	Image
.725	Output Plug	0.7 X 2.5 X 10MM (EIAJ-1)
.725-HP	Output Plug	O.7 X 2.5 X 10MM (HARD PLASTIC EIAJ-1)
.932	Output Plug	0.9 X 3.2 X 9.0MM
100	Output Plug	1.0 X 3.8 X 9.5MM
100-8MM MOLDED	Output Plug	1.0 X 3.8 x 8MM
101	Output Plug	1.1 X 3.0 X 9.0MM
101 RA MOLDED	Output Plug	1.1 X 3.0 X 9.5MM RIGHT ANGLE MOLDED (11MM STANDARD MOLD)
101A-HP	Output Plug	1.1 X 3.5 X 9.0MM (HARD PLASTIC)
103	Output Plug	1.3 X 3.5 X 9.5MM
103 RA MOLDED	Output Plug	1.3 X 3.5 X 11MM RIGHT ANGLE (MOLD LENGTH OPTIONAL-STANDARD MOLD 11MM
103D MOLDED WITH DETENT	Output Plug	1.3 X 3.5 x 9.5MM
103D WITH DETENT	Output Plug	1.3 X 3.5 X 9.5MM (OCTANGLE WITH DETENT)
103D-HP	Output Plug	1.3 X 3.5 X 9.5MM (HARD PLASTIC WITH DETENT)
103RA ASSEMBLY	Output Plug	1.3 X 3.5 X 9.5MM RIGHT ANGLE ASSEMBLY PLUG
107	Output Plug	1.7 X 4.0 X 9.5MM (EIAJ-2)
107-HP	Output Plug	1.7 X 4.0 X 9.5MM (HARD PLASTIC)
107A	Output Plug	1.7 X 4.75 X 9.5 MM (EIAJ-3)
107A MOLDED	Output Plug	1.7 X 4.75 X 14MM
107A-HP	Output Plug	1.7 X 4.75 X 9.5MM (HARD PLASTIC)
107A-RA	Output Plug	1.7 X 4.75 X 8.5MM RIGHT ANGLE
108 (EIAJ 4)	Output Plug	1.0MM PIN X 3.3 (ID) X 5.5 (OD)
108-RA MOLDED (EIAJ-4)	Output Plug	EIAJ-4 PLUG PIN SIZE 1.0MM (5.5MM OD x 3.3MM ID)
109 MOLDED (EIAJ-5)	Output Plug	EIAJ-5 PLUG PIN SIZE 1.4MM (6.5MM OD x 4.3MM ID)
109 (EIAJ 5)	Output Plug	1.4 X 4.3 X 6.5MM
201	Output Plug	2.5MM MALE DIAMETER x 11MM LENGTH
201 MOLDED	Output Plug	2.5MM DIAMETER X 11MM LENGTH (11MM STANDARD MOLD)
202	Output Plug	3.5MM MALE x 14MM LENGTH
202 MOLDED	Output Plug	3.5 X 14MM (14MM STANDARD MOLD)
202RA	Output Plug	3.5MM MALE RIGHT ANGLE x 14MM LENGTH
202STER	Output Plug	3.5MM MALE STEREO
205	Output Plug	2.1 X 5.5 X 9.5MM
205 MOLDED	Output Plug	2.1 x 5.5 x 11MM (STANDARD MOLD 11MM)
205 MOLDED WITH DETENT	Output Plug	2.1 X 5.5 X 9.5MM
205 RA MOLDED 18AWG	Output Plug	2.1 X 5.5 X 11MM RIGHT ANGLE 18AWG
205 RA MOLDED 22AWG	Output Plug	2.1 X 5.5 X 11MM RIGHT ANGLE 22AWG
205-HP HARD PLASTIC SHELL	Output Plug	2.1 X 5.5 X 9.5MM (9.5MM ROUND HARD PLASTIC)
205A	Output Plug	2.1 X 5.5 X 14MM
205A MOLDED	Output Plug	2.1 X 5.5 X 14MM
205RA-14MM ASSEMBLY	Output Plug	2.1 X 5.5 X 14MM RIGHT ANGLE ASSEMBLY PLUG
205RA-9.5MM ASSEMBLY	Output Plug	2.1 X 5.5 X 9.5MM RIGHT ANGLE ASSEMBLY PLUG
206	Output Plug	2.5 X 5.5 X 9.5MM
206 D MOLDED	Output Plug	2.5 x 5.5 x 9.5MM INSULATED PLUG TIP W/ INNER SPRING CONTACT AND DETENT
206 MOLDED	Output Plug	2.5 x 5.5 x 11MM (STANDARD MOLD 11MM)
206 RA MOLDED 18AWG	Output Plug	2.5 X 5.5 X 11MM RIGHT ANGLE 18AWG
206 RA MOLDED 22AWG	Output Plug	2.5 X 5.5 X 11MM RIGHT ANGLE 22AWG
206-HP HARD PLASTIC SHELL	Output Plug	2.5 X 5.5 X 9MM (9MM ROUND HARD PLASTIC)
206A	Output Plug	2.5 X 5.5 X 14MM
206A MOLDED	Output Plug	2.5 X 5.5 X 14MM DC PLUG MOLDED W/ DETENT
206RA-14MM ASSEMBLY	Output Plug	2.5 X 5.5 X 14MM RIGHT ANGLE ASSEMBLY PLUG
206RA-9.5MM ASSEMBLY	Output Plug	2.5 X 5.5 X 9.5MM RIGHT ANGLE ASSEMBLY PLUG
209	Output Plug	3.1 X 6.3 X 9.5MM
212	Output Plug	3 CONDUCTOR – AVAILABLE WITH MOLD
851	Output Plug	2.5MM MALE DIAMETER x 11MM LENGTH WITH COUPLING RING
860	Output Plug	1.3 X 3.5 x 9.5MM

For
AC-DC units, to determine output plug polarity refer to the following diagram
that corresponds to the diagram on the label of the power supply:

fig. 1

fig. 2

fig. 3

fig. 4

Figures 1 and 2 represent an output plug with inside positive polarity (IP;
for barrel-type plugs) or tip-positive polarity (TP; for pin-type plugs).

Figures 3 and 4 represent an output plug with inside negative polarity (IN;
for barrel-type plugs) or tip-negative polarity (TN; for pin-type plugs).